[LINUX] Install 64-bit OS (bate) on Raspberry Pi

With the release of 8GB version for Raspberry Pi 4 the other day, the 64-bit version (bate) of the OS has also been released. This time I will install the 64-bit version OS.

environment

--Use Windows 10 --Installed on RaspberryPi3 + (because I don't have 4) --Installed on 64GB microSD card with Etcher --Headless setting and operation

table of contents

-Download -Install -[Initial setting](#Initial setting) -[Network Settings](#Network Settings) -[Enable SSH](Enable #ssh) -[Wi-Fi settings](# wi-fi settings) -[SSH connection](#ssh connection) -[Initial setting](#Initial setting) - raspi-config -[Change Password](#Change Password) -[Change Rokel](#Change Rokel) -[Change time zone](#Change time zone) -Update --[Exit raspi-config](Exit # raspi-config) --[Update Package](#Update Package) -[At the end](#At the end)

download

Click Download here from the here page to download the zip file.

Installation

--Write the downloaded file to the microSD card. --This time, we will use Etcher. Please download and install from here. --After starting Etcher, click Flash from File and select the zip file of the download OS. --Check the installation destination in the middle, and if it is different, change it with Change. --Click Flash with the correct installation destination selected. --Wait a moment and close Etcher when the installation is complete.

network settings

Enable SSH

--Immediately after installation I think that Windows probably does not recognize the microSD card, so please point the microSD card again. --When the microSD card (boot) is displayed, open it and create an ssh file. (Be careful not to become ssh.txt)

Wi-Fi settings

Skip this when operating by connecting to Ethernet.

--Create wpa_supplicant.conf on the microSD card (boot) and make the following

country=JP
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
    ssid="SSID to connect to"
    psk="Password to connect to"
}

The password is stored in clear text. You can hash it later, but I will omit it this time.

SSH connection

--Point the microSD to the Raspberry Pi, connect the power supply, and wait for a while until it starts up. --Start a command prompt or powershell and connect to Raspberry Pi with the following command.

ssh [email protected]

--You will be asked yes / no ?, so enter yes. --If you enter ssh pi @ raspberry pi again, you will be SSH connected to RasPi and asked for the password, so you can log in by entering the initial password raspberry.

Initial setting

raspi-config

--Enter the following command to display raspi-config.

sudo raspi-config

Change Password

-Select 1 and change your password

Local change

--Select 4 --Select I1 --Ja_JP.UTF-8 Select with the space key according to UTF-8and press enter to confirm. --You will be asked for the system locale, so selectja_JP.UTF-8`.

Change time zone

--Select 4 --Select I2 --Select Asia --Select Tokyo

update

--Select 8 to start the update.

Exit raspi-config

--Press the right key and select Finish to exit raspi-config. --Reboot when asked if you want to reboot.

Package update

Update the package with the following command.

sudo apt update
sudo apt upgrade -y
sudo apt dist-upgrade -y

At the end

That's all for OS installation and simple initial setup. I don't know if it makes sense to make RaspberryPi3 + 64bit! __ After I finished writing, I noticed that this was an article that had nothing to do with 64bit.

Related article

-Install Samba on Raspberry Pi and create a file server

My Accounts

Donate


Recommended Posts

Install 64-bit OS (bate) on Raspberry Pi
Install docker-compose on 64-bit Raspberry Pi OS
Install OpenCV4 on Raspberry Pi 3
Install TensorFlow 1.15.0 on Raspberry Pi
raspberry pi 4 centos7 install on docker
Install ghoto2 on Raspberry Pi (memo)
Install OpenMedia Vault 5 on Raspberry Pi 4
VScode intellisense doesn't work on Raspberry Pi OS 64bit! (Python)
How to install NumPy on Raspberry Pi
pigpio on Raspberry pi
Cython on Raspberry Pi
Install cvxopt on 64bit Anaconda
Install tomcat 9 on Cent OS 8
Install pyenv on Raspberry Pi and version control Python
Introduced pyenv on Raspberry Pi
Use NeoPixel on Raspberry Pi
Create a partition and then install the Raspberry Pi OS
Testing uart communication on Raspberry Pi
MQTT on Raspberry Pi and Mac
Install Adopt OpenJDK 11 on Cent OS 8
Install Python 3.8 on Ubuntu 20.04 (OS standard)
Install python2.7 on windows 32bit environment
Install Sphinx on Mac OS X
Install Scipy on Mac OS Sierra
OS setup with Raspberry Pi Imager
Try using ArUco on Raspberry Pi
OpenCV installation procedure on Raspberry Pi
Install mitmproxy on Mac OS X
Install Python 3.9 on Ubuntu 20.04 (OS standard?)
Power on / off Raspberry pi on Arduino
Install Python 2.7 on Ubuntu 20.04 (OS standard?)
Detect switch status on Raspberry Pi 3
L Chika on Raspberry Pi C #
Install pgmagick on Mac OS X 10.9
Build wxPython on Ubuntu 20.04 on raspberry pi 4
SSD swap operation check for Raspberry Pi OS 64bit β version
"Honwaka Notification Lamp" on Raspberry Pi Part 2
Detect "brightness" using python on Raspberry Pi 3!
Install matplotlib on OS X El Capitan
USB boot on Raspberry Pi 4 Model B
Adafruit Python BluefruitLE works on Raspberry Pi.
Set swap space on Ubuntu on Raspberry Pi
Use the Grove sensor on the Raspberry Pi
Run servomotor on Raspberry Pi 3 using python
"Honwaka Notification Lamp" on Raspberry Pi Part 3
Install ubuntu on 32bit UEFI Ultra Notebook
Working with sensors on Mathematica on Raspberry Pi
Build OpenCV-Python environment on Raspberry Pi B +
Detect temperature using python on Raspberry Pi 3!
Mount Windows shared folder on Raspberry Pi
Matrix multiplication on Raspberry Pi GPU (Part 2)
I installed OpenCV-Python on my Raspberry Pi
Working with GPS on Raspberry Pi 3 Python
The microphone was not recognized on Linux's Raspberry Pi OS (formerly Raspbian).
Portable SSD expansion swap setting for Raspberry Pi OS 64bit β version
Why detectMultiScale () is slow on Raspberry Pi B +
Detect slide switches using python on Raspberry Pi 3!
Try using a QR code on a Raspberry Pi
Detect magnet switches using python on Raspberry Pi 3!
Raspberry Pi backup
Enjoy electronic work with GPIO on Raspberry Pi