Detect "brightness" using python on Raspberry Pi 3!

Introduction

My name is Ryosuke Kamei and I am an IT consultant based on the idea of "gentle IT"! Currently, in my work, I am doing upstream processes focusing on requirements analysis and requirements definition, but I also write programs! As part of our friendly IT activities, we will introduce "Raspberry Pi 3" (commonly known as Raspberry Pi), which has the philosophy of "providing inexpensive PCs that can be programmed for education"!

This time, we will detect the brightness! For example, you can make a security light that lights up when the room gets dark! [Razpai Magazine-June 2016 Issue Special Feature 1 Akiba's Popular Parts Wiring Diagram Best 17 12 Measuring Brightness](https://www.amazon.co.jp/ Razpai Magazine-June 2016 Issue- Nikkei BP PC Best Mook -? Nikkei Linux-ebook / dp / B01EH2RX42 / ref = as_li_ss_tl ie = UTF8 & dpID = 61P3o6Agz + L & dpSrc = sims & preST = OU09__BG0,0,0,0_FMpng_AC_UL160_SR120,160 & psc = 1 & refRID = 31SKG5E0DGKBSF9BWNGV & linkCode = ll1 & tag = sr2smail-22 & linkId = 18fd04738627edef8d6fffd6c9b8f9c2 ) Is used as a reference.

procedure

  1. Wiring
  2. Program illuminance.py
  3. Run the program

1. Wiring

Wiring diagram is [Razpai Magazine-June 2016 issue Special feature 1 Akiba's popular parts Wiring diagram best 17 12 Measuring brightness](https://www.amazon.co.jp/ Razpai Magazine-2016 June issue-Nikkei BP PC Best Mook-Nikkei Linux-ebook / dp / B01EH2RX42 / ref = as_li_ss_tl? -22 & linkId = 18fd04738627edef8d6fffd6c9b8f9c2) As it is.

If you get an image like this, referring to the picture of the circuit Raspberry Pi 3でpythonを使い「明るさ」を検出する!回路図.jpg

I also made a video Click the video commentary →

Text version From the Raspberry Pi side

--Raspberry Pi Pin 1 (3.3V) --AD Converter 8 Vdd --Illuminance sensor left side --Raspberry Pi 19th pin (MOSI) --AD converter 5 MOSI --Raspberry Pi 21st pin (MISO) --AD converter 6 MISO --Raspberry Pi 23rd pin (SCLK) --AD converter 7 CLK --Raspberry Pi 24th pin (CE0) --AD converter 1 CS --Raspberry Pi 6th pin (GND) --AD converter 4 Vss

From AD converter (difference only)

--AD converter pin 2 (CH0) --Illuminance sensor right side --Resistance (10kΩ)

Other

--Resistance (10kΩ) --GND

2. Program illuminance.py

Program is also [Razpai Magazine-June 2016 Issue Special Feature 1 Akiba's Popular Parts Wiring Diagram Best 17 12 Measuring Brightness](https://www.amazon.co.jp/ Razpai Magazine-June 2016 No.-Nikkei BP Personal Computer Best Mook-Nikkei Linux-ebook / dp / B01EH2RX42 / ref = as_li_ss_tl? = 18fd04738627edef8d6fffd6c9b8f9c2) is referred to.

The source is uploaded to GitHub, so please use it as you like.

Clone with git


$ git clone https://github.com/RyosukeKamei/raspberrypi3.git

illuminance.py


#Library to control GPIO
import wiringpi
#Timer library
import time
#Get arguments
import sys

# MCP3002(A/Specify the channel to which the D converter) is connected
SPI_CH = 0

#MCP3002 to be read (A/Specify the analog input channel of the D converter)
READ_CH = 0

#Specify the brightness threshold as an argument
param = sys.argv
set_illuminance = int(param[1])

#SPI initialization
wiringpi.wiringPiSPISetup( SPI_CH, 1000000 )

while True:
    # MCP3002(A/Create data to send to D converter)
    buffer = 0x6800 | ( 0x1800 * READ_CH )
    buffer = buffer.to_bytes( 2, byteorder='big' )
    
    #Get the value of CH0 using SPI
    wiringpi.wiringPiSPIDataRW( SPI_CH, buffer )
    
    #The values are sent in 2 bytes, so combine them into one value.
    illuminance_value = ( buffer[0] * 256 + buffer[1] ) & 0x3ff
    
    #Output brightness threshold and illuminance
    print ("Brightness threshold: " + str(set_illuminance) )
    print ("Illuminance: " + str(illuminance_value) )
    
    #"Bright" is displayed when the brightness exceeds the standard value, and "Dark" is displayed when the brightness falls below the standard value.
    if ( illuminance_value > set_illuminance ):
        print ("bright")
    else:
        print ("dark")
    
    #Detected by 1 second
    time.sleep(1)

3. Run the program

I recorded the video of how it is moving. Click the video commentary →

Set the brightness threshold to 700


$ sudo python3 illuminance.py 700

site map

Raspberry Pi 3 setup

Install Raspberry Pi 3 → Wireless LAN → Japanese input / output → Operate from Mac

Build a Python + MySQL environment with Docker on Raspberry Pi 3!

Install Docker on RaspberryPi3 Build a Python + bottle + MySQL environment with Docker on RaspberryPi3![Easy construction] Build a Python + bottle + MySQL environment with Docker on RaspberryPi3![Trial and error]

Make an air conditioner integrated PC "airpi" with Raspberry Pi 3!

Make an air conditioner integrated PC "airpi" with Raspberry Pi 3!

Let's play with Raspberry Pi 3 and python

Programming with Node-RED programming with Raspberry Pi 3 and programming normally Light the LED with python on Raspberry Pi 3 (Hello World) Detect switch status on Raspberry Pi 3 Run a servo motor using python on Raspberry Pi 3 Control the motor with a motor driver using python on Raspberry Pi 3! Detect slide switch using python on Raspberry Pi 3! Detect magnet switch using python on Raspberry Pi 3! Detect temperature using python on Raspberry Pi 3! Sound the buzzer using python on Raspberry Pi 3! Detect analog signals with A / D converter using python on Raspberry Pi 3! Detect "brightness" using python on Raspberry Pi 3! Detect "temperature (using A / D converter)" using python on Raspberry Pi 3! Output to "7-segment LED" using python on Raspberry Pi 3!

Rules focused on test-driven development

Coding rules "Let's write gentle code" (FuelPHP) Naming convention "Friendly to yourself, team-friendly, and unseen members after 3 months"

Web application development with Docker + Python

Install Python3, related libraries pip, virtualenv and frameworks Django, bottle, Flask on CentOS on Docker! With a Dockerfile that summarizes these!

Easy to develop environment construction (Docker + PHP)

PHP environment + Eclipse is linked to Apache using Docker Building FuelPHP development environment using Docker Create CRUD skeleton using initial settings of FuelPHP development environment using Docker and scaffold FuelPHP database migration

Recommended Posts

Detect "brightness" using python on Raspberry Pi 3!
Detect temperature using python on Raspberry Pi 3!
Detect slide switches using python on Raspberry Pi 3!
Detect magnet switches using python on Raspberry Pi 3!
Run servomotor on Raspberry Pi 3 using python
Detect "temperature (using A / D converter)" using python on Raspberry Pi 3!
Sound the buzzer using python on Raspberry Pi 3!
Detect analog signals with A / D converter using python on Raspberry Pi 3!
Output to "7-segment LED" using python on Raspberry Pi 3!
Try using ArUco on Raspberry Pi
Detect switch status on Raspberry Pi 3
Access google spreadsheet using python on raspberry pi (for myself)
Adafruit Python BluefruitLE works on Raspberry Pi.
Working with GPS on Raspberry Pi 3 Python
Control the motor with a motor driver using python on Raspberry Pi 3!
pigpio on Raspberry pi
Cython on Raspberry Pi
Try using a QR code on a Raspberry Pi
Make DHT11 available on Raspberry Pi + python (memo)
Connect to MySQL with Python on Raspberry Pi
Build a Python development environment on Raspberry Pi
Build an OpenCV4 environment on Raspberry Pi using Poetry
[Raspberry Pi] Publish a web application on https using Apache + WSGI + Python Flask
Try debugging Python on Raspberry Pi with Visual Studio.
Try using the temperature sensor (LM75B) on the Raspberry Pi.
Raspberry Pi + Python + OpenGL memo
Ubuntu 20.04 on raspberry pi 4 with OpenCV and use with python
raspberry pi 1 model b, python
Install pyenv on Raspberry Pi and version control Python
Broadcast on LINE using python
Introduced pyenv on Raspberry Pi
Using the 1-Wire Digital Temperature Sensor DS18B20 from Python on a Raspberry Pi
Use NeoPixel on Raspberry Pi
Install OpenCV4 on Raspberry Pi 3
Install TensorFlow 1.15.0 on Raspberry Pi
Install PyCall on Raspberry PI and try using GPIO's library for Python from Ruby
VScode intellisense doesn't work on Raspberry Pi OS 64bit! (Python)
Run AWS IoT Device SDK for Python on Raspberry Pi
Cross-compiling for Raspberry Pi Zero on Debian-Try using shared libraries
Testing uart communication on Raspberry Pi
USB over ethernet using Raspberry pi
MQTT on Raspberry Pi and Mac
raspberry pi 4 centos7 install on docker
Introducing Python using pyenv on Ubuntu 20.04
Notes on using MeCab from Python
Preparing python using vscode on ubuntu
Install ghoto2 on Raspberry Pi (memo)
Study on Tokyo Rent Using Python (3-2)
Notes on installing Python using PyEnv
OpenCV installation procedure on Raspberry Pi
Notes on using rstrip with python.
Install Python on CentOS using Pyenv
Study on Tokyo Rent Using Python (3-3)
Power on / off Raspberry pi on Arduino
Install OpenMedia Vault 5 on Raspberry Pi 4
Using a webcam with Raspberry Pi
Install Python on CentOS using pyenv
L Chika on Raspberry Pi C #
[Raspberry Pi] Changed Python default to Python3
Build wxPython on Ubuntu 20.04 on raspberry pi 4
Use python on Raspberry Pi 3 to illuminate the LED (Hello World)