[PYTHON] I tried to register a station on the IoT platform "Rimotte"

Preparation

[Last post](https://qiita.com/remotte_jp/items/39278287097a7a25432d "I tried installing the IoT platform" Rimotte "") on Windows "[Rimotte Station](https://www. remotte.jp/ja/user_guide/station/install_station "Installing the station") "was installed. If the orange icon surrounded by the red frame below is displayed in the task tray, the preparation on the station side is okay. If it is not displayed, open the Windows menu and click "Start and Stop Services" in the "Remotte Station" folder to start the service. If it still does not appear, try clicking "Control Panel" displayed on the above screen.

Check your web browser

Limotte uses a peer-to-peer communication technology called WebRTC to connect a web browser and a station directly without going through a server, but due to the adult circumstances of each browser manufacturer, we support this technology. Some are present and some are not supported. When you open the User Guide on the Limotte website, the supported browser types are written, and at the moment it is as follows. .. Windows: Chrome (recommended), new Microsoft Edge (* 1), Firefox 　　　MacOS : Safari Linux: Chrome (recommended), Firefox Android: Chrome (recommended), Firefox 　　　iOS : Safari

• 1 The function that handles voice may not work properly. So now I'm touching a Windows machine, so according to the above, it's a browser that can only be used with Chrome (recommended) or Firefox. The following instructions assume that you are using the recommended Chrome and that Chrome is set as the default web browser for Windows 10. If you're using a computer that doesn't have Chrome installed, we recommend that you download and install it first. To change your default browser, open the menu at the bottom left of your Windows desktop screen, click Settings, click Apps in the window that appears, and select Default Apps on the left side of the screen. Then change the "Web browser" settings. If you really don't want to change the default browser, there is another way, which will be explained in the next section.

Start the station

Click the icon in the task tray or click "Control Panel" in the "Remotte Station" folder in the Windows menu to display the "Remotte Control Panel". Since "Unregistered station" is displayed in the upper left of the screen, first press the "Start" button at the top of the screen. Within a few seconds (or it may take tens of seconds depending on the old computer and the situation), the status of the station is [Stop] ---> [Startup] ---> [Initializing the execution environment] --- > [Running] is displayed and the button changes from "Start" to "Stop".

Station registration

Next, click the "Administrative Tools" button at the top right of the screen to start the browser and start the station registration procedure. Be careful here! </ strong> As explained in the previous section "Checking your web browser", the screen below must be open in Chrome or Firefox. </ font> If it is open in a browser other than these, you can substitute it by closing the above screen, starting Chrome or Firefox, and then manually entering a certain URL to open it. The URL is the address displayed in blue at the bottom of the screen when "Station Information" is selected in the "Remotte Control Panel" as shown below. After that, instead of pressing the "Administrative Tools" button on the control panel every time you try to open the administrative tool, you can substitute by opening this address by specifying the URL. By the way, on the station registration screen, first click "Display license agreement", check the contents, and if there are no problems, check "I accept the agreement" and email the station administrator. Enter the address and press the "Get verification code" button. Then, an email containing the verification code will be sent to the email address you entered. Enter this verification code on the screen below and click "Login to Management Tool". Next, you will be prompted to name the station. The name of the station cannot be changed later, so think of an appropriate name before entering it, and press the "Registration Complete" button. When the station registration is completed successfully, the following screen will be displayed. If you get any error and don't see the screen below, the first thing to check is if you're using a web browser that Limotte supports. As I wrote in "Checking your web browser" at the top of this post, I want to make sure you're using the right browser. If you still get the error, press the "Stop" button at the top of the "Remotte Control Panel" screen to restart the station, and then change the station status from "Running" to "Stop". After checking, let's start over by pressing the "Start" button again. Immediately after registering the station, there is no app, so I feel a little lonely. The Limotte Station allows you to run multiple apps at the same time. For example, while running an app that collects the values of environmental sensors, it also runs an app that detects motion and recognizes the face with the camera, and at the same time runs a human sensor, voice analysis, and a security app and notification app that uses push buttons. Let's register a lot of apps on this lonely screen and have fun using it!