Changes in mybatis-spring-boot-starter 1.3

We have summarized the 1.3 changes released on April 10, 2017.

In addition, it should be noted

Please see.

Note: ** 2017/8/21: Addendum ** Added changes in version 1.3.1. ** 2019/5/7: Addendum ** Reflected the changes in versions 1.3.2, 1.3.3 and 1.3.4.

Required version of dependent library

To use version 1.3, the following versions are required.

Spring Boot 1.5+ required

Starting with version 1.3, the @MybatisTest annotation, which supports the Bean definition required when testing the functionality of MyBatis, has been added, and that annotation depends on the API supported by Spring Boot 1.5, so Spring Boot 1.5+ Is required. If you want to use mybatis-spring-boot-starter with Spring Boot 1.4 series, please use version 1.2 series.

Dependent library version update

In version 1.3, the following library versions have been updated.

Library name 1.2.0 version 1.3.0 version 1.3.1 version 1.3.Version 2 1.3.Version 3 1.3.Version of 4
MyBatis 3.4.2 3.4.4 3.4.5 3.4.6 3.4.6 3.4.6
MyBatis Spring 1.3.1 1.3.1 1.3.1 1.3.2 1.3.2 1.3.2
Spring Boot 1.4.3.RELEASE 1.5.2.RELEASE 1.5.6.RELEASE 1.5.10.RELEASE 1.5.19.RELEASE 1.5.20.RELEASE

Note: Compared to version 1.2.1 released at the same time as version 1.3.0, only the Spring Boot version has been updated (1.4.5.RELEASE-> 1.5.2.RELEASE).

Addition of ConfigurationCustomizer interface

Callback interface (ʻorg.mybatis.spring.boot.autoconfigure.ConfigurationCustomizer) for customizing the Bean that holds MyBatis configuration information (Bean of ʻorg.apache.ibatis.session.Configuration) with Java code ) Has been added. If you define a bean that implements this interface as shown below, the configure method of ConfigurationCustomizer will be called back, and you can use Java code to complete the configuration of MyBayis. Can be customized to.

Bean definition example of ConfigurationCustomizer using lambda expression


@Configuration
public class MyBatisConfiguration {
	@Bean
	ConfigurationCustomizer mybatisConfigurationCustomizer() {
		return (configuration) -> {
			// aplication.Implemented customization code that cannot be specified / expressed by properties
			configuration.getTypeHandlerRegistry().register(RoundingMode.class, EnumOrdinalTypeHandler.class);
		};
	}
}

Note:

The ConfigurationCustomizer interface is also backported to version 1.2.1, which was released at the same time as version 1.3.0.

Addition of @MybatisTest (mybatis-spring-boot-starter-test)

Starting with version 1.3, the @MybatisTest annotation has been added to support the bean definition required when testing the functionality of MyBatis. This is [@DataJpaTest](http://docs.spring.io/spring-boot/docs/1.5.2.RELEASE/reference/htmlsingle/#boot-features-testing-spring- provided by Spring Boot. boot-applications-testing-autoconfigured-jpa-test) and [@JdbcTest](http://docs.spring.io/spring-boot/docs/1.5.2.RELEASE/reference/htmlsingle/#boot-features -testing-spring-boot-applications-testing-autoconfigured-jdbc-test) will be the MyBatis version (of course, the usage is the same as the annotation provided by Spring Boot !!). Along with this support, mybatis-spring-boot-starter-test has been newly established to solve the libraries required when testing MyBatis, so if you want to test the functions provided by MyBatis, , Let's add the following definition to pom.xml! !!

pom.xml


<dependency>
	<groupId>org.mybatis.spring.boot</groupId>
	<artifactId>mybatis-spring-boot-starter-test</artifactId>
	<version>1.3.4</version>
	<scope>test</scope>
</dependency>

For example, if you want to test the following Mapper interface,

src/main/java/com/example/mapper/TodoMapper.java


package com.example.mapper;

import com.example.domain.Todo;
import org.apache.ibatis.annotations.Insert;
import org.apache.ibatis.annotations.Mapper;
import org.apache.ibatis.annotations.Options;
import org.apache.ibatis.annotations.Select;

@Mapper
public interface TodoMapper {

    @Insert("INSERT INTO todo (title, details, finished) VALUES (#{title}, #{details}, #{finished})")
    @Options(useGeneratedKeys = true)
    void insert(Todo todo);

    @Select("SELECT id, title, details, finished FROM todo WHERE id = #{id}")
    Todo select(int id);

}

It is OK if you create the following test case class using @MybatisTest.

src/main/java/com/example/mapper/TodoMapperTests.java


package com.example.mapper;

import com.example.domain.Todo;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.mybatis.spring.boot.test.autoconfigure.MybatisTest;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.jdbc.core.BeanPropertyRowMapper;
import org.springframework.jdbc.core.namedparam.BeanPropertySqlParameterSource;
import org.springframework.jdbc.core.namedparam.MapSqlParameterSource;
import org.springframework.jdbc.core.namedparam.NamedParameterJdbcOperations;
import org.springframework.jdbc.support.GeneratedKeyHolder;
import org.springframework.test.context.junit4.SpringRunner;

import static org.assertj.core.api.Assertions.assertThat;

@RunWith(SpringRunner.class)
@MybatisTest // (1)
public class TodoMapperTests {

    @Autowired
    private TodoMapper todoMapper; // (2)

    @Autowired
    private NamedParameterJdbcOperations jdbcOperations; // (3)

    @Test
    public void insert() {

        // setup
        // none

        // perform test and assertions
        {
            // (4)
            Todo newTodo = new Todo();
            newTodo.setTitle("drinking party");
            newTodo.setDetails("Ginza 19:00");
            todoMapper.insert(newTodo);

            // (5)
            Todo actualTodo =
                jdbcOperations.queryForObject("SELECT * FROM todo WHERE id = :id",
                    new MapSqlParameterSource("id", newTodo.getId()),
                    new BeanPropertyRowMapper<>(Todo.class));
            assertThat(actualTodo.getId()).isEqualTo(newTodo.getId());
            assertThat(actualTodo.getTitle()).isEqualTo("drinking party");
            assertThat(actualTodo.getDetails()).isEqualTo("Ginza 19:00");
            assertThat(actualTodo.isFinished()).isEqualTo(false);
        }
    }


    @Test
    public void select() {

        // (6)
        // setup
        Todo newTodo = new Todo();
        newTodo.setTitle("drinking party");
        newTodo.setDetails("Ginza 19:00");

        GeneratedKeyHolder keyHolder = new GeneratedKeyHolder();
        jdbcOperations.update(
            "INSERT INTO todo (title, details, finished) VALUES(:title, :details, :finished)",
            new BeanPropertySqlParameterSource(newTodo), keyHolder);

        // perform test and assertions
        {
            // (7)
            Todo actualTodo = todoMapper.select(keyHolder.getKey().intValue());

            assertThat(actualTodo.getId()).isEqualTo(keyHolder.getKey().intValue());
            assertThat(actualTodo.getTitle()).isEqualTo("drinking party");
            assertThat(actualTodo.getDetails()).isEqualTo("Ginza 19:00");
            assertThat(actualTodo.isFinished()).isEqualTo(false);
        }
    }

}
Item number Description
(1) In class@MybatisTestIs given. By adding this annotation, only the AutoConfigure class required to run MyBatis will be enabled. The default behavior is to disable component scanning, which prevents untitled beans from being registered in the DI container during testing.
(2) Inject the Mapper to be tested.@MybatisTestIf you give, AutoConfigure provided by MyBatis will generate a Bean of Mapper.
(3) To validate registration data and register test dataNamedParameterJdbcTemplateInject the Bean of.@MybatisTestIf you giveJdbcTemplateWhenNamedParameterJdbcTemplateBean is registered in the DI container.
(4) To be testedinsertCall the method.
(5) insertValidate the method call result. here,NamedParameterJdbcOperationsThe registered data is acquired via the method of and the validity of the registered data is verified.
(6) selectRegister test data to test the method. here,NamedParameterJdbcOperationsTest data is registered via the method of. In addition, provided by Spring Framework@SqlYou can also register test data using annotations.
(7) To be testedselectCall the method.
(8) selectValidate the method call result.

If you execute the test in this state, the Bean definition defined in the Spring Boot application class (class with @SpringBootApplication) existing in the upper package is also read, so it is necessary for MyBatis test. Missing beans may be registered in the DI container. If you do not want to register beans that are not needed for MyBatis testing in the DI container, create an empty Spring Boot application class like the one below in the same package as the test case class. By doing this, you can disable the Spring Boot application class in the upper package.

src/test/java/com/example/mapper/MapperTestApplication.java


package com.example.mapper;

import org.springframework.boot.autoconfigure.SpringBootApplication;

@SpringBootApplication
public class MapperTestApplication {

}

For more information, see the Official Reference (http://www.mybatis.org/spring-boot-starter/mybatis-spring-boot-test-autoconfigure/) and the [@DataJpaTest](@DataJpaTest] provided by Spring Boot. http://docs.spring.io/spring-boot/docs/1.5.2.RELEASE/reference/htmlsingle/#boot-features-testing-spring-boot-applications-testing-autoconfigured-jpa-test) and [ @JdbcTest](http://docs.spring.io/spring-boot/docs/1.5.2.RELEASE/reference/htmlsingle/#boot-features-testing-spring-boot-applications-testing-autoconfigured-jdbc- See the test) reference.

Note: The @MybatisTest annotation (and mybatis-spring-boot-starter-test) is also backported to version 1.2.1, which was released at the same time as version 1.3.

Improved input completion of property values on the IDE

Until 1.3.0, input completion for some properties (mybatis.configuration.default-scripting-language) did not work, but" [Adding additional meta-data] provided by Spring Boot (http://docs.spring.io/spring-boot/docs/current/reference/htmlsingle/#configuration-metadata-additional-metadata) ", input completion will be effective from 1.3.1. Has been improved.

Supports specifying typeAliasesSuperType in configuration properties

[Changes in version 2.0](https://qiita.com/kazuki43zoo/items/38a24e051359e39c012c#%E3%82%B3%E3%83%B3%E3%83%95%E3%82%AE%E3%83 % A5% E3% 83% AC% E3% 83% BC% E3% 82% B7% E3% 83% A7% E3% 83% B3% E3% 83% 97% E3% 83% AD% E3% 83% 91 % E3% 83% 86% E3% 82% A3% E3% 81% A7typealiasessupertype% E3% 81% AE% E6% 8C% 87% E5% AE% 9A% E3% 82% 92% E3% 82% B5% E3 See% 83% 9D% E3% 83% BC% E3% 83% 88). (Supported from version 1.3.3)

Recommended Posts

Changes in mybatis-spring-boot-starter 2.0
Changes in mybatis-spring-boot-starter 2.1
Changes in mybatis-spring-boot-starter 1.3
Changes in mybatis-spring-boot-starter 1.2
Changes in Mockito 2
Changes in Java 11
Changes in JUnit5M4-> M5
Core Location changes in iOS 14
Major changes in Spring Boot 1.5
Java version notation that changes in Java 10
Major changes in Spring Framework 5.0 core functionality